Overview
Honeywell M7215A1016 Damper Motors provide 25 lb-in. torque with spring return and 2-10 Vdc modulating control of economizer systems, ventilation dampers and combustion air dampers used in residential or commercial HVAC equipment.
Features
- Synchronous Motor.
- Quiet, high efficiency drive motor.
- Spring returns motor shaft to normal position in the event of power failure.
- High impact, glass-fiber reinforced plastic case is rugged, lightweight and corrosion resistant.
- Uses Q298B Linkage.
Product Specifications
- Dimensions (in.)
- 4 1/2 in. high x 5 in. wide x 5 3/16 in. deep
- Dimensions (mm)
- 114 mm high x 127 mm wide x 132 mm deep
- Used With
- W7212/13/14 Economizers
- Weight (lb)
- 3 lb
- Materials
- UL94-5V plastic housing
- Comments
- With captive mounting nuts; Vibration– V2 level
- Mounting
- Foot-mounted
- Frequency
- 50 Hz; 60 Hz
- Approvals, Underwriters Laboratories Inc.
- Listed File: E4436, Guide: XAPX
- Electrical Connections
- Quick-connect terminals
- Operating Humidity Range (% RH)
- 5 to 95% RH, non-condensing
- Power Consumption
- Driving– 8 VA, Holding– 3 VA
- Operating Temperature Range (F)
- -25 F to +125 F
- Operating Temperature Range (C)
- -32 C to +52 C
- Shipping and Storage Temperature Range (F)
- -30 F to +150 F
- Shipping and Storage Temperature Range (C)
- -34 C to +66 C
- Timing
- Minimum– 90 sec, Run Time Maximum– 90 sec
- Stroke
- Fixed Stroke; Angle of Rotation– 90 degrees maximum
- Control Signal
- 2 to 10 Vdc
- Fail Safe Mode
- Spring Return
- Torque Rating (lb-in.)
- 25 lb-in.
- Torque Rating (Nm)
- 2.8 Nm
- Additional Torque Ratings (lb-in.)
- Breakaway– 40 lb-in.
- Additional Torque Ratings (Nm)
- Breakaway– 4.5 Nm
- External Auxiliary Switches Available
- Yes
- Rotation to Open
- CCW
- Timing, Nominal
- Opening– 90 sec
- Spring Return Timing
- Nominal– 18 sec
- Feedback
- No
- Motor shafts
- 1
- Deadweight Load on Shaft
- Power End– 15 lbs max
Get a FREE QUOTE now or call us to speak to a representative!
